Imbalance of laundry! This problem, one way or another, concerns all types of washing machines. The bottom line is that the clothes during washing is twisted into a knot and a standard software installation and distribution of the laundry is not always enough. Most often this happens when you wash more clothes with a fine, especially for washing bedding. Solution: before washing, duvet covers and pillowcases better to sew;-small clothes washed separately and preferably in a special grid. To read more click here: Everest Capital. -If there was an unusually strong vibration of a washing machine, you should not slow off the machine, shake hands and put the clothes back to the beginning of extraction. 3.
Not proper installation washing machine! Very often the cause of vibration is not Proper installation of washing machines (see proper installation). Is not admissible that the washing machine swung on the legs, not even much, it will lead to the resonant vibrations and the end, can be very pechalnym.Tak as if the machine travels freely across the floor, that too is a big reason .Raznye substrate, such as rubber mats, particleboard, plywood, etc., will not be tolerated, ideally machine should stand on a hard and level floor deviation from this causes the vibration. And the wooden floor as linoleum are no exception. An example would be if you put a stool on the bed and try to resist it, do not advise it. Solution: -Need to twist the legs, while ensuring that the machine was completely stable. To test the need to take her top cover and shake in different directions, when properly installed machine will not movable;-to machine did not go on the floor, you must remove all the debris from under the rubber feet (dust, hair, dirt and hair from animals), wiping them with a rag with some degreaser, and as this operation needs to be done with floor under the feet.